in recent years, with chinas massive infrastructure investment and the rapid advance of industrialization process, the aluminum industrys rapid growth in output and consumption, and china has become the worlds largest aluminum production base and the consumer market. after nearly 10 years of rapid growth, chinas aluminum industry entered a new stage of development, and showed a lot of new development trend.
industrial aluminium profile application prospect
global aluminum production and marketing situation, from the point of capacity distribution, can produce aluminium profile of the worlds 2009 countries and regions around 95, more than about 2200 production enterprises, the production capacity in china accounted for more than 50%, the proportion of world output can be ranked first.
with the global economic growth and aluminum use expanded, global consumption of aluminum by about 8.69 million t growth in 2001 to 2001 of the 15.5 million t, compound annual growth rate of about 7.5%. is expected in 2012, the global aluminum consumption will amount to about 16.69 million ton
in regional terms, from 2001 to 2009 of the worlds major regional consumption present a different trend, consumption proportion rising rapidly in china, europe and north america took on a downward trend. by the end of 2009, chinas consumption share of global consumption ratio of 47%, while europe, north america and japan accounted for 21%, 8% and 21% respectively.
our country has developed for aluminum consumption. in industry, at present, chinas industrial aluminum extrusions total are about 30%, mainly used in transportation (including automobile manufacturing, rail transportation, equipment and machinery and equipment manufacturing, durable consumer goods industry (including light), respectively in the applications of aluminum in china accounted for about 10%, 10% and 12%. over the same period of europe, north america and japan aluminum consumption structure, industrial cost ratio reached 60%, 55% and 60%, respectively, are much higher than our country. differences in consumption structure reflects chinas aluminium in the field of industrial production, development and application, also indicates the industry in our country.
expected in the next 5 ~ 10 years, chinas industrial aluminum consumption will continue to grow, the proportion of aluminum products will from the current 30% to about 45 ~ 50% in 2015. and according to our country government related planning, the next 10 years, industrial materials accounted for the proportion of aluminum are always to be close to 70%.
industrial development is more important, aluminum can be for enterprise to win a good economic benefits and social values. at present, the building material production and cost of sales is relatively transparent, low value-added products, and industrial profiles can improve at least 20% ~ 30% of the profits for the enterprise space. in addition, because of its low carbon environmental protection in production process, meet the national energy conservation and emissions reduction and the mission of lightweight aluminum industry development.
the state policy support industrial development
in the next few years, industrial aluminum consumption will grow rapidly and in high-end products will become the mainstream. as my country is in industrialized development in our country, the next 20 to 30 years, it is moving in the middle-income countries, the key to realize the third strategic goal. aluminum industrial applications of large space, in our country, the existing 124 industry department, there are 113 departments use aluminum products, the proportion of 91%.
for industrial aluminum low proportion in the whole aluminum products of the status quo of national related department to put forward the guidance, the consumption structure of aluminum nine ministries and commissions such as the national development and reform commission, ministry of finance on the aluminum accelerate industrial structure adjustment guidance on notice, aluminum is one of the main target of industrial structure adjustment, increase the proportion of high value-added processing materials, industrial profiles and architectural profiles ratio 7:3.
at the same time, along with transportation of lightweight, electronic power and the development of mechanical manufacturing industry, aluminum industry in our country broader application field, industrial aluminum, tubes, high strength in the bar of the demand is growing fast. in the next few years chinas industrial aluminum consumption in the proportion of total aluminum consumption will rise year by year, in the proportion of aluminum products will from the current 30% to about 45 ~ 50% or so in 2015, is to dominate the market gradually.
because the aluminum product has the characteristics of qualitative light, price low, recyclability, emphasis on energy conservation and environmental protection in the country under the premise of aluminum in transportation, home appliances, electronic and mechanical equipment in the areas of future market is very huge.
for example,cars, according to estimates, if car weight reduce 10%, less 6 to 8% of the fuel consumption, aluminum is undoubtedly the best car weight loss material. data according to the research of alcoa to 500000 bus, if use aluminum steel, make weight 1 t per car, you can save 2.4 billion litres of fuel. at the same time also can significantly reduce greenhouse gas emissions. at present, the global car with aluminum amount by an average of 1980 at the beginning of the 50 kg/up to 107 kg/m, increased 1.14 times. according to the european aluminium association predicts that by 2015 europe automotive aluminum amount is expected to reach 200 kg/m.
in addition, new energy and environmental protection industry in china at an average annual rate of more than 20% of rapid growth, of which the most widely used is the "solar and led industry, such as aluminum and it has good heat conduction, the advantages of light weight, in the industry gradually get a large number of applications.
technology innovation has become the new trend of industry
in recent years, my home of aluminum processing industry enterprises small in scale, concentration is not high, redundant construction, developed a number of industry adjustment policy. issued in october 2007 the aluminum industry access conditions of the access of new aluminum processing projects, and regulations related to energy consumption, the metal consumption, strengthen environmental protection, improve the industry barriers to entry. the improvement of industry admittance threshold will control the scale of investment in aluminum processing industry, standardize the industry disorderly competition, to pay attention to product quality, saving energy and reducing consumption of enterprises to create a good competitive conditions.
along with the national industrial policy, industrial structure adjustment and improvement of consumers on product quality, extensive, low added value of the aluminum processing industry present situation gradually changed. future industry integration will continue to increase, some product positioning low-standard market and backward production techniques and equipment enterprises will face the market, capital, cost, energy consumption and technical aspects of the pressure, part of the leading production technology, excellent quality, market-oriented, strong innovation ability, management of advanced enterprise will occupy more market share.
and internal integration as the industry, the aluminum will accelerate the corporate restructuring mergers and acquisitions, the enterprise will be towards large scale, specialization, collectivization, the brand development. product technology development, quality management, sales and service of comprehensive strength, becoming the key factor of enterprises bigger and stronger.
zhongwang demonstration effect appeared gradually
in this regard, zhong wang is in chinese industrial structure adjustment under the background of chinese manufacturing industry provides a sample for reference. in 2002, zhong wang cross the rubicon, seize the pulse of the industry, the implementation of strategic transformation. in 2005, when the aluminum extrusion materials industry still use 16 mn extruder under construction aluminum production, zhong wang is ordered one of the worlds largest 125 mn aluminium alloy double acting aluminium extrusion machine, make the worlds first super and large and industrial profiles extrusion production line, for its industrial aluminum market laid the foundation of the equipment and abundant technical.
by 2010, zhong wang has more than 73 of the worlds leading aluminum extrusion production line, industrial aluminum maori contribution rate reached 99.6%, drive the companys overall gross margin reached an all-time high of 40.6%, and gradually edged out the hydro and alcoa, become the worlds second largest after sweden thapa industrial aluminum producers. of course, the rapid development of industry, aluminum industry, to promote domestic many aluminum manufacturing enterprises ahead "try". under the pattern of pack around, however, if you want to taste the tempting cake, not only need equipped with sophisticated equipment and research and development team, need more with the organization and strategic layout. "development", "fused", "die", "squeeze" is industrial aluminum several key links, but enterprises each link may be competitors, draw lessons from and even beyond, whereas zhongwang in each link did excellence and seamless link, thus effectively guarantee the led in the field of industrial aluminum.
today, zhong wang and aiming at aluminium rolling material, the aluminum project, mainly used in aerospace, marine, rail transportation and other fields, the move aims to meet the strong demand of domestic high-speed rail and aircraft manufacturers, and become the strong power of zhongwang future profit growth.
|
